Forklifts

What is a Powered Industrial Truck?
A Powered Industrial Truck (PIT) is a mobile, power-driven vehicle used to carry, push, pull, lift or stack material. There are twelve (12) different types of PITs, and designated types of PITs can be operated safely in varying environments (e.g. flammable areas, dusty environments, etc.) Talk to your management team to find out what specific type of PIT your company has and where it is OK to use them within your facility.

Operator Training
PITs are a very important part of material handling in many industries. They are also a source of serious accidents. All personnel who operate PITs must be trained and certified in their safe operation every three years. The training includes both classroom and vehicle operation. The training covers:

  • Features of the specific PIT to be operated
  • Operating procedures of the specific PIT to be operated
  • Safety concerns of specific PIT to be operated
  • Workplace conditions and safety concerns of areas where PITs will be operated.
  • Learn and practice actual operation of specific PITs to be operated.
  • Demonstrate proficiency performing the PIT operator duties specific to the workplace.
  • Powered Industrial Truck Stability
    The PIT is based on the concept of two weights being balanced on opposite sides of a pivot point. The forward wheels are the pivot point. This is the same concept as a teeter-tooter. The load on the forks must be balanced by the weight of the PIT. The center of gravity is the single point where an object is balanced in all directions. Every object has a center of gravity. When a PIT picks up a load, the truck and load have a new combined center of gravity. The stability of the PIT is determined by the location of its center of gravity, or if the PIT is loaded, the combined center of gravity.

    • Operating a Powered Industrial Truck
    Operating a PIT takes skill and knowledge. The PIT operator and those around the operator must treat the PIT with respect. Using proper operating procedures will minimize the potential for accidents and injuries.

    Forklifts must be removed from service when they are not in safe operating condition. PITs are required to be inspected before use (at least once per shift) and should include, but not be limited to; brakes, steering, forks, mast chain components, data plate, tires, counterweight, overhead guard, control levers, horn, lights, etc. Using an inspection checklist makes this task easier and thorough.

    A PIT is not a car. PITs are tall and narrow and tip over easily, so operators must drive cautiously. Stopping a PIT is also not the same as stopping a car. The two small wheels are the braking wheels, so PITs do not stop quickly.

    Powered Industrial Truck Safety
    The most recent OSHA data indicates 95,000 workers are injured, and approximately 100 are killed each year in PIT related incidents. Most PIT injuries are caused by tip over accidents. The primary causes of tip overs are excessive speed while turning and raised, unbalanced loads. The best way to avoid tip overs is to properly counterbalance your load. All loads must be placed as close to the back of the forks as possible.

    General Safety Rules

     

    Keep the load low

    Never carry riders

    Plan your route

    Follow safe speed limits

    Park safely

    Watch for pedestrians

    Avoid sharp turns

    Watch for chuckholes

    Leave aisle room

    Maintain safe visibility

    Watch the slope

    Use your horn when approaching
    Follow all the rules of your company’s Powered Industrial Truck safety program.

    © 2010 OilFieldStuff.com - All Rights Reserved. | Website Design by SemmesWebDesign

    OilfieldStuff.com. (hereinafter OFS) make no representations about the suitability of the information contained on this web site for any purpose. This web site and all of the information it contains is provided "as is" without warranty of any kind whether express or implied. In no event shall OFS be liable to any person or business entity for any special, direct, indirect, punitive, incidental or consequential damages arising out of or in connection with the use of this web site or any other web site to which this site is linked, including, without limitation, any lost profits, business interruption, or loss of programs or information. OFS shall not be responsible for any errors or omissions contained in this web site and reserves the right to make changes without notice. User therefore acknowledges and accepts that the information published on this web site may include technical inaccuracies or typographical errors. The hypertext links on this web site will allow you to leave this web site. The links are provided as a service to users and are not sponsored by or affiliated with this web site or under the control of OFS. The links are to be accessed at the user's own risk, and OFS and the authors of this web site make no representation or warranties about the content of these links. OFS is not responsible for the content of any linked site or any link contained in a linked site. OFS is providing these links to you only as a convenience, and the inclusion of any link does not imply endorsement by OFS of the site.